Synthesis and Characterization of New Chelating Resin: Adsorption Study of Copper(II) and Chromium (III) Ions

Acrylamide based monomer, 5-methyl-2-thiozyl methacrylamide (MTMAAm) was synthesized by the reaction of 2-Amino-5-methyl thiazole with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The monomer MTMAAm was characterized by FT-IR and ¹H-and ¹³C-NMR spectral studies. A new chelating resin, poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] was synthesized. This resin was characterized by FT-IR. In order to determine the adsorption behavior of chelating resin, the adsorption isotherm of Cr(III) and Cu(II) were studied. It was found that the adsorption isotherm of the ions fitted with Langmuir-type isotherms. From the Langmuir equation, the adsorption capacity of chelating resin for Cr(III) and Cu(II) was found to be 7.77 mg g^{? 1} and 4.27 mg g^{? 1}, respectively. Binding equilibrium constant was calculated to be 0.155 L mg^{? 1} and 0.106 L mg^{? 1} for Cu(II) and Cr(III), respectively.     

The obtaining of NiCr2O4 nanoparticles by unconventional synthesis methods

This paper presents a study regarding the obtaining of NiCr₂O₄ by two new unconventional synthesis methods: (i) the first method is based on the formation of Cr(III) and Ni(II) carboxylate-type precursors in the redox reaction between the nitrate ion and 1,3-propanediol. The thermal decomposition of these complex combinations, at ~300 °C, leads to an oxide mixture of Cr₂O_3+x and NiO, with advanced homogeneity, small particles and high reactivity. On heating this mixture at 500 °C, Cr₂O₃ reacts with NiO to form NiCr₂O₄, which was evidenced by FT-IR and X-ray diffractometry (XRD) analysis; (ii) the second method starts from a mechanical mixture of (NH₄)₂Cr₂O₇ and Ni(NO₃)₂·6H₂O. On heating this mixture, a violent decomposition at 240 °C with formation of an oxides mixture (Cr₂O₃ + CrO₃) and NiO takes place. On thermal treatment up to 500 °C, an intermediary phase NiCrO₄ is formed, which by decomposition at ~700 °C leads to NiCr₂O₄, evidenced by FT-IR and XRD analysis. NiCr₂O₄ is formed, in both cases, starting with a temperature higher than 400 °C, when the non-stoichiometric chromium oxide (Cr₂O_3+x ) loses the oxygen excess and turns to stoichiometric chromium oxide (Cr₂O₃), which further reacts with NiO.     

Voltammetric behavior of rutin at a boron-doped diamond electrode. Its electroanalytical determination in a pharmaceutical formulation

This paper examined for the first time, the possibilities of the usage of a boron-doped diamond electrode for the redox behavior of rutin using cyclic and adsorptive stripping voltammetry. The cyclic voltammograms showed a pair of redox peaks at lower potentials followed by an irreversible oxidation peak at higher positive potential. Using square-wave adsorptive stripping voltammetry, the compound yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 4.0 at +0.48 V (vs. Ag/AgCl) (after 60 s accumulations at a fixed potential of 0.2 V). The calibration curve was linear in the concentration range from 0.01 µg mL^?1 to 0.1 µg mL^?1 (1.64×10^?8 M ? 1.64×10^?7 M). A detection limit of 0.0017 µg mL^?1 (2.78×10^?9 M) was observed without any chemical modifications and electrochemical surface pretreatments. As an example, the practical applicability of boron-doped diamond electrode was tested with the measurement of rutin in dietary supplement products.      

Stereoconvergent Generation of a Contrasteric syn‐Bicyclopropylidene (=syn‐Cyclopropylidenecyclopropane) by Stille‐Like Coupling

Stereoisomerically pure endo‐ and exo‐7‐halo‐7‐(trimethylstannyl)benzonorcar‐3‐enes (=endo‐ and exo‐(1‐halo‐1a,2,7,7a‐tetrahydro‐1H‐cyclopropa[b]naphthalen‐1‐yl)trimethylstannane) 4 and 6 were selectively obtained by lithium? tin or magnesium? tin transmetalation in good yields (Scheme 2 and 3). The reaction of these compounds with copper(I) thiophene‐2‐carboxylate (CuTC) produced in both cases the corresponding C_S‐symmetric bicyclopropylidene (=cyclopropylidenecyclopropane) syn‐ 1 , a single diastereoisomer (Schemes 5 and 6). The structure of syn‐ 1 was undoubtedly elucidated by X‐ray single crystal diffraction. The coupling mechanism of the carbenoid cyclopropane is discussed (Scheme 7).     

Facile Method for 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylides: Highly Stereoselective Synthesis of Substituted Pyrrolidine Derivatives

The substituted pyrolidine derivatives with high stereoselectivity were obtained through cycloaddition reaction in the presence of a Lewis acid namely diethylzinc by solvent‐free grinding method.     

Magnesium Bromide and Magnesium Chloride Hexahydrate Catalyzed One‐Pot Synthesis of Dihydropyrimidines via Biginelli Reaction under Solvent‐Free Conditions

Biologically important 12 new important 3,4‐dihydropyrimidin‐2‐(1H)‐ones (‐thiones) were synthesized with in one‐pot three‐component Biginelli reaction from the corresponding aromatic aldehydes (5‐methyl‐2‐thiophenecarboxaldehyde and 2‐chloro‐5‐nitrobenzaldehyde), β‐keto esters (ethylacetoacetate, allylacetoacetate, and t‐butylacetoacetate), and urea/thiourea in the presence of catalytic amount of magnesium bromide and magnesium chloride hexahydrate as nontoxic, inexpensive, and easily available catalysts under solvent‐free conditions at 80 and 100°C. Compared with the catalyst‐free three‐component Biginelli reaction conditions, this method consistently has the advantage of short reaction time (45–100 min) and good to excellent yields (75–91%).     

4-hydroxy-2H-1,2-benzothiazine-3-carbohydrazide 1,1-dioxide-oxalohydrazide (1:1): X-ray structure and DFT calculations

The title compound, 4-hydroxy-2H-1,2-benzothiazine-3-carbohydrazide 1,1-dioxide-oxalohydrazide (1:1), is determined using X-ray diffraction techniques and the molecular structure is also optimized at the B3LYP/6-31G(d,p) level using density functional theory (DFT). The asymmetric unit consists of four independent molecules. The oxalohydrazide molecules have the centre of symmetry at the mid-point of the central C-C bond. Each thiazine ring adopts a half-chair conformation. Intermolecular C-H...O, N-H...O and N-H...N hydrogen bonds produce R ₂ ² (10), R ₂ ² (13), R ₃ ³ (12) and R ₃ ³ (15) rings, which lead to one-dimensional polymeric chains. An extensive three-dimensional supramolecular network of N-H...N, N-H...O, C-H...O and O-H...O hydrogen bonds is responsible for crystal structure stabilization.     

Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Preparation of New Calix[4]arene-Immobilized Biopolymers for Enhancing Catalytic Properties of Candida rugosa Lipase by Sol–Gel Encapsulation

The article describes preparation of new calixarene biopolymers consisting of the immobilization of convenience calixarene derivative onto cellulose and chitosan biopolymers, and the encapsulation of these calixarene biopolymers with Candida rugosa lipase within a chemical inert sol–gel supported by polycondensation with tetraethoxysilane and octyltriethoxysilane. The catalytic properties of immobilized lipase were evaluated into model reactions employing the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of naproxen methyl esters from racemic prodrugs in aqueous buffer solution/isooctane reaction system. The resolution studies using sol–gel support have observed more improvement in the enantioselectivity of naproxen E?=?300 with Cel-Calix-E than with encapsulated lipase without calixarene-based materials. Furthermore, the encapsulated lipase (Cel-Calix-E) was still retained about 39 % of their conversion ratios after the fifth reuse in the enantioselective reaction.     

Cloud point extraction of aluminum (III) in water samples and determination by electrothermal atomic absorption spectrometry,flame atomic absorption spectrometry and UV-visible spectrophotometry

Cloud point extraction was applied as a preconcentration step for the determination of trace level of Al(III) in water samples with electrothermal atomic absorption spectrometry (ETAAS), flame atomic absorption spectrometry (FAAS) and UV-visible spectrophotometry. The aluminum was extracted as aluminum-Eriochrome Cyanine R (ECR) complex, at pH 6 by micelles of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The investigations showed that the same CPE procedure can be used for different detection techniques. The results obtained from these techniques were evaluated. Under the optimal conditions, limit of detection obtained with ETAAS, FAAS and UV-visible spectrophotometry were 0.03 ng mL^?1, 0.06 µg mL^?1 and 0.01 µg mL^?1, respectively. The accuracy of the procedure was tested by analysing certified reference material. The method was successfully applied to determination of aluminum in water samples and dialysis fluid.